HOME | PRODUCTS | REVIEWS | CONTACT | LINKS
MMx2 "MultiMode" Tube Guitar Amplifier

FRENZEL MMx2 Tube Guitar Amplifier
MMx2 "MultiMode" Tube Guitar Amplifier

CLICK HERE to check out some reviews of the MMx2!

Description

2 channels. 4 modes per channel. 2 power amp modes. 

The FRENZEL MMx2 tube guitar amplifier was designed to be extremely flexible and will do just about anything any one of our other amps will do, and more! This amp comes with two completely independent preamp channels with separate tone stacks and master volume controls, each also with 4 distinct modes that are selectable via pull switches on the GAIN and VOLUME controls of each channel. 

In "NORMAL" mode, CHANNEL 1 will create those beautiful clean to warm overdrive "Tweed" style tones. The BRIGHT switch on the CHANNEL 1 GAIN control transforms the preamp into more of a "Plexi" style preamp voiced with emphasis on both the upper-mids and highs, while the BOOST switch on the VOLUME control adds in an extra gain stage for awesome crunch and overdrive.

CHANNEL 2 starts out as a sweet sounding slightly warmed-up vintage "Plexi" style channel, but when you pull either or both of the BOOST switches on the GAIN and VOLUME controls (both of which add an additional gain stage to the circuit), you'll have insane amounts of high-gain screaming tube overdrive/distortion tones to choose from!

Designed to be somewhat of a "super simple tweaker's dream" amp, each channel's independent BASS, MIDDLE, and TREBLE tone controls and separate GAIN and VOLUME controls have a familiar simple feel, while also allowing you to dial in nearly infinite variations on any of the multiple modes. 

Back these two ultra-configurable preamps up with a conservatively rated 100 watt output section (NOTE: Lower power versions also available) driven by a matched quad of 6550 output tubes and dual 5U4GB rectifier tubes for the perfect amount of compression and sag, and you've got a monster amp suited for just about any style of music out there! 

Other features include relay-driven channel switching circuitry with absolutely no solid state in the signal path for instantaneous and reliable channel switching, a master volume control, a shared PRESENCE control with a PULL NNFB switch that transforms the power amp section into a "No-Negative-FeedBack" style power amp for more power amp attack, FRENZEL MultiValve bias so you can easily swap out the power tubes with various other types, slick gloss black laser engraved aluminum front and rear panels with bright silver lettering, and heavy duty silver aluminum knobs all packed in a genuine Tolex covered 13-ply birch head cab with chrome hardware and a tinted "plexi" acrylic front panel.

FRENZEL - MMx2 - "MultiMode" Tube Guitar Amplifier

FRENZEL MMx2 Tube Guiltar Amplifier
MMx2
(click to enlarge)

Features

  • 2 fully independent channels, each with 4 modes.

  • 1 button footswitch with LED indicator.

  • Relay-driven channel switching circuitry. 

  • Selectable NNFB mode.

  • "MultiValve" biasing allows you to use different output tubes (6L6, KT66, EL34, KT88) as drop in options.

  • 4-8-16 ohm output impedance selector.

  • Dual speaker output jacks.

  • Extra long 10' grounded power cord.

  • Heavy duty silver aluminum knobs.

  • Slick GLOSS BLACK aluminum faceplate.

  • Rotary STANDBY / POWER switch.

  • Genuine Tolex® covered 13-ply birch head cabinet with a heavy duty handle, rubber feet, and chrome corners.

  • Tinted "plexi" acrylic front panel.

Tech Notes

  • True point-to-point hand-wiring for the highest quality and shortest possible signal path.

  • Input/output jacks isolated from chassis, DC on the filaments, and star grounding for super low noise and hum.

  • Built using only the finest of parts including low noise polypropylene caps, metal film resistors, ceramic sockets, Switchcraft jacks, etc.

Tube Compliment

  • (5) Electro Harmonix 12AX7EH

  • (2) or (4) Electro Harmonix 6550 or (2) Electro Harmonix 6L6 (depending on specific model)

  • (1) or (2) Electro Harmonix 5U4GB (depending on specific model)

Front Panel

  • INPUT JACK

  • CHANNEL SELECTOR

  • CHANNEL 1 CONTROLS

  •   GAIN (Pull BRIGHT)

  •   VOLUME (Pull BOOST)

  •   BASS

  •   MIDDLE

  •   TREBLE

  • CHANNEL 2 CONTROLS

  •   GAIN (Pull BOOST 1)

  •   VOLUME (Pull BOOST 2)

  •   BASS

  •   MIDDLE

  •   TREBLE

  • MASTER CONTROLS

  •   VOLUME

  •   PRESENCE (Pull NNFB)

  • LED POWER INDICATOR

  • STANDBY/POWER SWITCH

Rear Panel

  • POWER CORD

  • FUSE

  • FUSE

  • FOOTSWITCH

  • PREAMP OUT LEVEL

  • PREAMP OUT

  • POWER AMP IN

  • SPEAKER OUTPUT JACK

  • SPEAKER OUTPUT JACK

  • IMPEDANCE SELECTOR (4/8/16 OHMS)

Output Power

  • 25, 50, or 100 watts (depending on specific model)

Dimensions

  • 18.5" W x 9.5" H X 11.75" D


Reviews

CLICK HERE to check out some reviews of the MMx2!


Pricing

Model Output Power / Tubes Retail Price Availability

MMx2-100

100 watts (4x 6550, 2x 5U4) $3,999 NOT CURRENTLY
IN PRODUCTION

MMx2-50

50 watts (2x 6550, 1x 5U4) $3,799 NOT CURRENTLY
IN PRODUCTION

MMx2-25

25 watts (2x 6L6, 1x 5U4) $3,599 NOT CURRENTLY
IN PRODUCTION

FRENZEL MMx2 Tube Guitar Amplifier

MORE PRODUCTS


HOME | PRODUCTS | REVIEWS | CONTACT | LINKS

Thank you for visiting www.FrenzelElectronics.com!

© 2005-2008 Frenzel Electronics
CONTACT US

CLICK HERE to tell a friend about this site!